Skip to product information
1 of 1

Dynatrac

Complete Dynatrac ProRock 60 High-Pinion Semi-Float Rear Axle Assembly - 2007-2018 Jeep JK - Stock Width

Complete Dynatrac ProRock 60 High-Pinion Semi-Float Rear Axle Assembly - 2007-2018 Jeep JK - Stock Width

SKU:DT JP60-2X4010-A

Regular price $6,295.00
Regular price Sale price $6,295.00
Sale Sold out
Shipping calculated at checkout.

The Dynatrac ProRock 60® was the first of its kind when it was unveiled in 2002. Today, it’s the off-road performance standard to which all other Dana 60 based axles are compared. And now you can have the legendary strength and durability of a Dynatrac ProRock 60 for your 2007-2018 Jeep JK at the lowest price ever offered with this specially configured, completely assembled semi-float rear axle.

Here are the details of this specific axle configuration:

  • Custom Machined Dynatrac ProRock 60 High-Ground Clearance, High-Pinion Semi-Float Rear Axle
  • Heavy-Duty Nodular-Iron ProRock 60 Housing
  • Superior Lightweight Semi-Float Axle Design
  • Standard Lifted JK Housing Geometry and Pinion Angle
  • Stock JK Axle Width (65.5-inch)
  • Heavy-Duty 3.125-inch Diameter, 0.313-inch Wall Draw-Over-Mandrel (DOM) Axle Tubing
  • Dynatrac 3/16-inch JK Rear Coil Spring Suspension Bracket Assembly Kit, Installed
  • Pro Rock 60 Nodular Iron Diff Cover, Installed
  • Dynatrac Heavy-Duty Raised Track Bar (not shown in photo)
  • Dynatrac Pro 60 Dual Sump/High Volume (DSHV) High Pinion Oil Seal Modification, Installed
  • ARB Air Locker, 35 Spline, Installed, with ARB Kit
  • Ring & Pinion, 9.75-inch Diameter, Reverse-cut, 5.38 Ratio, Installed
  • Dynatrac JK Pro Series 60, 35-Spline 1.5-inch Rear Axleshaft Assembly Kit, Installed
  • New Billet Tone Rings Already Installed on the Axleshafts
  • Dynatrac Billet Axleshaft Retainers with Studs - Always Insist on Dynatrac Retainers. Our Studs Will not Strip and Spin Like Other Retainers
  • Axleshafts are Drilled for both 5 on 5 and 5 on 5 1/2 inch Wheel Bolt Pattern; Comes with Studs Installed in 5 on 5 Bolt Pattern
  • Large Tapered Roller Axle Bearings 
  • Dynatrac JK ABS/ESP Sensor Mount, Installed
  • Axle is Detailed and Painted Dynatrac Gloss Black
  • 100% Made in the USA
  • Exclusive Dynatrac 1-year No-Fault, Unlimited-Mileage Warranty

The axle comes assembled. All you need to do is bolt it under your Jeep JK, add oil and re-use your stock rear disc brakes. Or you can upgrade to the Dynatrac ProGrip™ Brake System for a serious improvement in stopping power.

This is a specially priced ProRock 60 axle configuration. If you are interested in other options, please call us at 714-596-4461 for a custom estimate.

NOTE: Photo shows brake rotors and brake backing plates which are not included. Customer to re-use factory JK brake rotors and backing plates. Axle includes raised track bar mount, not shown in photo.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

View full details

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Paul
Dynatrac ProRock 60

When my rear axle in my TJ blew back in 2017, I wasn't sure who I should have build me an axle. I was told by my boss and friends that Dynatrac made better axles for Jeep than currie. When I went to their shop the owner gave me a personal tour of the facility. The customer service is amazing and their axles are even better! I have had it for 3 years now and I have beaten the **** out of it and it takes it! I have a 1999 Jeep TJ with a Pro Rock 60 in the rear with an ARB air locker, 35 spline axle shafts, and explorer brake conversion discs sitting on 35 BFG mud terrains. This axle is the most solid part of my car. After being super pleased with their service and product, I bought a ProRock44 housing for the front to be built when the front blows!

Y
Yuppie T.Y.
Default Topic

When I purchased my YJ in 2013, one of the big selling points was that it had a high pinion ProRock 60 rear axle. The axle was installed in 2004 or so and is still going strong today! I have not had a single worry or issue with it in the back of the Jeep, definitely the best option out there! Oh, did I mention the ground clearance advantage? It has the same, if not better, ground clearance than your typical Dana 44, how cool is that???

P
Posjku
Worth the Investment!!

I've had 4 trouble free years with a prorock 44 up front and just pulled the trigger on the prorock 60 rear axle.
Great fitment on both axles and outstanding quality....couldn't be happier with dynatrac's

B
BLK1007
Bulletproof with PR60

Top notch quality and extremely beefy. I had great experience with my PR44 so shortly after the front, I upgraded my rear with PR60. The Dynatrac Axles has transformed my truck and I'm 100% confident to go anywhere!